Pokusili se tu upravit Air box při použití full exhaust systému od Zardu. Výsledky jsou zajímavé vzhledem k nákladnosti úpravy (samozřejmě když nepočítáme ty Zardy)
Vyřešili to tak, že seřízly vrchní kryt air boxu a tím ho víc otevřeli. Na zbytek mrkněte na detailnější popis a grafy...
http://www.bikeboy.org/sport1000zard.html
![Sport 1000 Zard](http://img.motofotky.cz/upload/images/forum/2013/08/137432_zard1.jpg)
![If you’ve had a look at the air filter setup on a Sport Classic you’ll know how restrictive the inlet is and that the filter itself isn’t much better. If you haven’t, see the photo below. That little square opening arrowed is the air inlet!](http://img.motofotky.cz/upload/images/forum/2013/08/137433_sport1000airbox1.jpg)
![The filter is a round style, probably 60mm diameter and 180 or so mm long (that’s a very rough guess, made sitting in the lounge room tapping away on the laptop several weeks after looking at the filter). Thinking about it now, I guess a single 60mm hole feeding a bike with 45mm throttle bodies isn’t that bad, and the airbox is quite large in volume. But the inlet is still much less flowing than an SS or Monster with an open lid. So I did the obvious thing and attacked the air filter lid with a cutoff wheel. (as you do), photo below.](http://img.motofotky.cz/upload/images/forum/2013/08/137434_sport1000airbox2.jpg)
![The next photo shows the little passage that passes for the std air inlet – it’s about 20 - 25mm square and stays that way for maybe 100mm before reaching the filter. After hacking the lid there’s a round hole about 60mm or so. So you’d expect it to help. It’s much easier to see once you’ve hacked the bit above the filter off.](http://img.motofotky.cz/upload/images/forum/2013/08/137436_sport1000airbox3.jpg)
![Graf](http://img.motofotky.cz/upload/images/forum/2013/08/137439_sp1g3.gif)
![](http://img.motofotky.cz/upload/images/forum/2013/08/137440_sp1g5.gif)
![](http://img.motofotky.cz/upload/images/forum/2013/08/137441_sp1g10.gif)
Naposledy editováno 23.02.2013 07:51:49
1 reakcí na tento příspěvek (reakce na) Tuning Air boxu Ducati Sport Classic
Sefo píše: Nálepka a fejkovej carbon, nic jinýho neupgraduju :) škoda že ten tvůj mechoš je tak daleko, potřeboval bych vyměnit olej, dokonce zvažuju, že bych to udělal sám, ale kurnik zmáknu to? :)
Hele já ti věřim
![](https://www.motorkari.cz/upload/images/smajlici/wink.png)
![](https://www.motorkari.cz/upload/images/smajlici/tongue.png)
![](https://www.motorkari.cz/upload/images/smajlici/cool.png)
E: video
Naposledy editováno 22.02.2013 14:39:19
1 reakcí na tento příspěvek (reakce na) Tuning Air boxu Ducati Sport Classic
Téma | Autor | Odp. | Posl. příspěvek |
---|---|---|---|
Classický koutek [1 ... 9, 10] Ducati Sport 1000 | VlastíkPlamínek | 297 | 9.10.2020 v 21:10 Petr7474 |
Svody Ducati Sport 1000 | danny82 | 15 | 12.3.2014 v 18:27 danny82 |
Čerpadlo Ducati Sport1000 Ducati Sport 1000 | danny82 | 12 | 20.9.2013 v 13:35 danny82 |
Pneu pro Ducati Sport1000 Ducati Sport 1000 | danny82 | 14 | 20.9.2013 v 13:32 danny82 |
Kód chyby P0170 - Fuel Trim Malfunc... Ducati Paul Smart 1000, Ducati GT 1000, Ducati Sport... | Horác | 15 | 7.8.2013 v 19:02 Horác |